Adjustable single lanyard for climbing and mountaineering
Ergonomic shape offers quick, precise adjustment;
Lanyard adjusts from 15 to 95 cm. The connector held in position by a rubber ring, to facilitate clipping;
Dynamic rope lanyard to reduce the force transmitted to the user in case of a short fall (1);
Used with a locking carabiner such as the ALUMINUM CARABINER SLACKLINE WITH SCREW-LOCK;
Attaches to the tie-in point(s) of the harness with a girth hitch.
(1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.
Slackline Aluminum Carabiner Screw Nut
An oval Carabiner with a gate opening of 20 mm. Breaking strength of 25 kN and a weight of only 78 gr. Made of high-tenacity anodized aluminum, in lime colour...
SLACKISUR leash and highline ring
SLACKISUR is a ring specifically designed to connect leash and highline. Thread the leash through the SLACKISUR and follow the manual to make the figure-eight knot...
Highline forged aluminum ring
Ultra light aluminum ring, forged to obtain a smooth sliding surface, anodized to increase its resistance.
Inner diameter of 60 mm and a breaking strength of up to 35...
HARNESSES ALPINE FLASH CAMP
The Alpine Flash builds on the amazing Flash harness with a purpose-built design for technical alpinism and ice climbing at the highest level.
By incorporating...
LEASH Line - Your rope sleeve
We produce our LEASH line specifically to protect and sleeve the dynamic rope which is meant to serve as a "leash" on high tensioned set-ups (such as highline,...
VORTEX - leash and highline connector
VORTEX is actually the best way to connect your leash to a highline. Thread the leash through the VORTEX and follow the manual to make the knot correctly and...
Highline LEASH classic or dynamic
This leash is made with a QUASAR 9.9 mm dynamic rope, threaded into a tight sleeve of 20 m LEASH LINE tubular polyamide webbing.
The CLASSIC LEASH has the same...
Adjustable single lanyard for climbing and mountaineering
Ergonomic shape offers quick, precise adjustment;
Lanyard adjusts from 15 to 95 cm. The connector held in position by a rubber ring, to facilitate clipping;
Dynamic rope lanyard to reduce the force transmitted to the user in case of a short fall (1);
Used with a locking carabiner such as the ALUMINUM CARABINER SLACKLINE WITH SCREW-LOCK;
Attaches to the tie-in point(s) of the harness with a girth hitch.
(1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.
