SLACKIBLOC - Aluminum Lock for Slackline Webbing
- Material: 4 mm tempered aluminum alloy plates, diverter and steel pin;
- Lock pin: select CLASSIC pin, or SAFETY push pin;
- Hollow diverter: reduced weight and retaining 95% of original webbing resistance;
- Compatible webbings: any polyester and nylon with 24-26 mm width, up to 10 mm thickness;
- Compatible connectors: omega shackles Ø8-Ø16 mm both directions, shackles Ø16-Ø20 on the pin, Quicklinks Ø8-Ø20, every symmetrical EN 12275 carabiner;
- Weight: 165 gr.;
- Made in: France.
Select the place of delivery and calculate the costs and shipping methods
The SLACKIBLOC is a light but quite strong and easy to use weblock, ideal for any 25 mm webbing.
The tempered aluminum body allows high resistance up to 10 kN and it is overall a light weight with its 165 gr. only.
- SLACKIBLOC has an anodized aluminum diverter which distributes the energy onto the webbing's surface;
- The pins are amde from stainless steel and allow the webbing to slide perfectly during ravelling;
- Reinforced and anodized aluminum make it resilient to any type of shock and humidity;
- The rear connection pin makes it compatible with a soft release.
What is Antislip?
AntiSlip is a clipped stystem specifically ideal for low tension set-ups. Any shock or vibration caused by a slackliner or the wind can cause slight slippage of the webbing inside most common weblocks, this clipping system4 serves to prevent this effect. Moreover, many feedbacks have shown us that due to big wind gusts or really intensive use, a loose tail of the webbing can possibly lead to a total derail of the line from it's weblock.
ANTISLIP system eliminates both of those risks and increases a lot your safety on Highlines. It is safer than a anti-slip knot.
Which connectors are the best to use with the SLACKIBLOC?
Our SLACKIBLOC is compatible with basically all standard types of connectors.
We recommend 2,2T BOW SHACKLES STAINLESS STEEL, one of the strongest stainless steel omega shackles.
The difference between our CHILI or SLACKIBLOC?
CHILI LINELOCK is the perfect linelock for extreme tension (up to 15 kn) .
The SLACKIBLOC is much lighter but provides the same strength. The included antyslip system though, can increase safety factors, especially for Highlines.
SLACKIBLOC is not a PPE product.
Before setting up a line for the first time with our SLACKIBLOC, please read carefully the instruction manual.
- TOTAL WEIGHT
- 165 gr
- WORKING LOAD LIMIT - WLL
- 15 kN
- SUGGESTED CONNECTOR
- 2,2T BOW SHACKLES STAINLESS STEEL
- MINIMUM BREAKING STRENGTH
- 60 kN
- MAXIMUM BREAKING STRENGTH
- 65 kN