
ROLLEX SLIDE STOP
ROLLEX SLIDE STOP- it's time to rest The SLIDE STOP is a simple and efficient tool that works like a little "handbrake" while resting or taping the highline. SLIDE STOP is not be used to stop the...
New generation carabiner pulley with a 1 inch roll. A must for every highliner, not only as a pulley but also as device to create a tensioning system.
ROLLEX is available in stock and ready to be shipped.
ROLLEX SLIDE STOP
€10.61 |
||
0,3T DYNEEMA ROUND SLING FOR SLACKIBLOC
€3.24 |
ROLLEX, the lightest aluminum carabiner with a 1 inch roll. A roll that runs on 2 ball bearings (SS version has stainless steel bearings), which guarantees smooth sliding movements. The single surface aluminum roll also prevents jamming your the line between bearings. The surface of the roll is perfectly smooth without leaving any pressure marks on your slackline.
The gate opening reaches up to 24 mm width, to leave the maximum entry space for the webbing.
ROLLEX is compatible with all slacklines from 24 to 26 mm width.
The shape of the ROLLEX body has been optimized for high strength usage, while stating only little weight of 129 gr.
The ROLLEX gate has a keylock shape in order to avoid snagging while clipping it to the line or harness.
NEVER DROP YOUR ROLLEX! - The the small lanyard hole under the gate allows you to tie it off safely with a 3 mm cord to your harness. This way you avoid dropoing your precious ROLLEX while clipping yourself to a highline.
Above the pulley roll you'll find a slot for a 2.5 cm webbing. You can fill the slackline through this slot and easily create an independent tensioning system in combination with a clutch device such as LINEGRIP, SNATCH or equivalent.
But this slot on the top of your ROLLEX also serves as placement for our so called SLIDE STOP, which allows brakeable and controlled sliding on a highline.
The SLIDE STOP is very handy while taping the main line and backup, it prevents slipping over the line so you can use both of your hands for taping. Also, you can use the SLIDE STOP to rest while moving across a long line.
ROLLEX is available as a CLASSIC model with automatic lever, or as ROLLEX SG with screw nut gate. The ROLLEX SG' screw nut is compatible with the rear hole of a LINEGRIP in all versions (even line grip 4th generation).
ROLLEX SS means stainless steel ball bearings, to be used even near the sea without oxidizing consequences.
ROLLEX is simply a new, advanced webbing pulley. Start your jorney and spin it up!
Warning
ROLLEX is certified EN 12275 standard. You always have to use a safety leash or another carabiner with opposing gate while sliding on a highline using a ROLLEX. Carefully read the instruction manual and follow the usage instructions described.
ROLLEX SLIDE STOP- it's time to rest The SLIDE STOP is a simple and efficient tool that works like a little "handbrake" while resting or taping the highline. SLIDE STOP is not be used to stop the...
Rollex & Relax
Perso je sors jamais sans mon Rollex!
Bien plus qu'un gadget, il est mon partenaire de highline n°1 !
A must have
At this point where highlining is getting, its so important to have this as an essential piece of gear. The rollex works great and is so affordable
Au top
Matériel très bien usiné. Très bien pour tendre la slack pour l'instant. Et sera très utile pour la highline.
Great product
I use it mainly as pulley to tension my primitive system. Together with the Snatch v2.2 I can easily tension long (up to 10m) slackline with primitive system requiring very few gear and light gear.
Rollex mousqueton
Très bonne qualité, correspond à la description
ROLLEX SLIDE STOP- it's time to rest The SLIDE STOP is a simple and efficient tool that works like a little "handbrake" while resting or taping the highline. SLIDE STOP is not be used to stop the...
Flat pulley with ball bearings The HIGHWHEEL is an aluminum pulley with a 2.5 cm (1 inch) roller base that slides on two steel ball bearings to ensure smooth movement. The special aluminum roller...